Articles · Decorating with plants
How to hang indoor plants from the ceiling safely
Published 2026-11-15
To hang a plant from the ceiling safely, weigh the pot right after watering, find a ceiling joist, and screw a hook into the center of the joist. Every part, from the hook to the hanger, must be rated by its maker for more than that wet weight. Drywall alone does not hold a hanging plant.
A falling pot can hurt someone and will damage the floor. A few minutes with a stud finder prevents both.
I earn a commission when you buy through links to Amazon. It costs you nothing extra.
Step 1: find the real load
The load is not the weight on the plant tag. It is the weight of everything that hangs, at its heaviest.
Weigh it wet. Water is heavy. One liter of water weighs 1 kg (a US quart weighs about 2 lb). Potting mix soaks up a lot of it. A pot weighs far more right after watering than it does when dry.
- Water the plant fully and let it drain.
- Put the pot in its hanger, with the saucer or outer pot it will hang in.
- Stand on a bathroom scale and note your weight. Step on again holding the plant. The difference is the load. A luggage scale also works for small pots.
Add for growth. The plant will get bigger, and you may move it to a larger pot.
Add for movement. A hanging pot gets bumped, swung, and tugged by pets and kids. A moving load pulls harder on the hook than a still one.
For these reasons, choose hardware rated well above the wet weight you measured.
Lighten the pot if you can. Plastic and resin pots weigh much less than ceramic or clay.
Step 2: understand the ceiling
Most Canadian and American homes have ceilings of drywall fastened to wood joists. The joists are the structure. The drywall is a thin skin.
A hook in a ceiling pulls straight out. Engineers call this a tension or pull-out load. It is the hardest kind of load for an anchor in drywall. A wall anchor mostly carries weight sideways, across the fastener. A ceiling anchor has only the grip of the drywall itself holding it up. Drywall is soft, and it gets weaker if it gets damp.
So the rule is: fasten into a joist.
Finding a joist
- Joists in wood-framed houses are usually spaced 40 cm (16 in) or 60 cm (24 in) apart, center to center.
- Use an electronic stud finder. Slide it across the ceiling and mark both edges of the joist. The center is halfway between.
- Check with a second method. Knock and listen for a dull, solid sound, or find the drywall screw heads with a strong magnet.
- Confirm with a small pilot hole. If the bit meets solid wood all the way in, you are in the joist. If it punches through into empty space after the drywall, you missed.
A stud finder from Amazon is the one tool worth buying for this job.
Before you drill
Wires and pipes run through ceilings. Do not drill near light fixtures, ceiling fans, smoke alarms, or vents. Drill only as deep as the screw needs.
Step 3: pick hardware rated for the job
The hanging system is a chain of parts. The weakest part sets the limit.
| Part | What to check |
|---|---|
| Ceiling hook | A steel screw hook or swag hook with a wood-screw thread, rated by the maker for hanging loads |
| Chain, rope, or cord | A working load rating above your wet weight |
| Hanger | Macrame, wire, or a pot with built-in hangers. Check knots, rings, and clips. |
| Connectors | S-hooks, carabiners, and swivels. Decorative clips are often not load rated. |
| The pot | Rim holes and plastic hanger clips can crack with age and sun |
Rules for reading ratings:
- Use the maker’s stated rating for the way you are using the part. Some hooks and anchors list a lower rating for ceilings than for walls. Use the ceiling number.
- If a package gives no rating, do not hang a plant from it.
- Choose a rating well above your measured wet weight. Never match it exactly.
Search for ceiling screw hooks for hanging plants, and read the rating on the listing and the package. Help with the hanger itself is in how to choose a hanging planter or macrame hanger.
Step 4: install the hook in a joist
- Mark the center of the joist.
- Drill a pilot hole straight up. Use the bit size the hook maker lists. If none is listed, pick a bit a little narrower than the solid core of the screw, not counting the threads.
- Drill as deep as the threaded part of the hook.
- Turn the hook in by hand. For more leverage, put a screwdriver through the hook and turn.
- Stop when the base sits snug against the ceiling, with all of the thread in wood. Turning past snug strips the hole.
- Test it. Pull down firmly by hand with more force than the plant will apply. Then hang the pot and watch it for a day.
If the hook spins without tightening, the wood is stripped or you missed the joist. Move to a new spot on the joist.
If there is no joist where you want the plant
You have better options than trusting drywall.
- Move the plant to the joist. A few centimeters (an inch or two) rarely matters. A swag hook and a length of chain let you fasten at the joist and drape the chain to where you want the pot.
- Use a wall bracket. A bracket screwed into a wall stud holds a hanging pot. See how to mount a wall planter for indoor plants.
- Use a freestanding plant hanger or a tall stand. No holes at all.
About toggle bolts. A toggle bolt spreads load across the back of the drywall and is the strongest type of hollow anchor. Makers do rate some for ceilings. Still, the drywall itself is the limit, and a constant hanging load on a ceiling panel is the weakest setup. Keep toggles for small, light plants, follow the maker’s ceiling rating, and choose a joist whenever one is in reach.
Do not use plastic expansion plugs, adhesive hooks, or suction hooks for ceiling plants. Do not hang plants from a light fixture or a curtain rod.
Other ceiling types
- Concrete. Common in apartments and condos. It needs a hammer drill and a masonry anchor rated for overhead tension. Many buildings do not allow drilling. Ask the building manager first.
- Rentals. Check the lease before you drill. A floor stand needs no holes.
Step 5: place and care for the plant
- Hang the pot where no one walks or sits directly under it, and where a door or cupboard will not hit it.
- Keep it near a window. Warm air collects up high, so hanging plants dry out faster in winter.
- Hang it low enough to check the soil and water it.
- Stop drips. Use a pot with an attached saucer or a solid outer pot, or take the plant to the sink. See how to water hanging plants indoors without a mess.
For plant ideas, see best hanging indoor plants.
Safety check twice a year
- Hook still snug, with no gap at the ceiling
- No cracks, sagging, or water stains in the ceiling around it
- Rope or macrame not frayed, faded, or rotting where it gets wet
- Rings, clips, and pot hangers not cracked or bent
- The plant reweighed if it has grown or been repotted
Take the plant down at the first sign of movement at the hook. If you are not sure the ceiling can carry the load, ask a carpenter.