The best grow light strips for indoor plants are rigid LED bars with full-spectrum white light. Look for bars that link end to end, mount under a shelf with clips or screws, and list their real power draw in watts. Hang them 15 to 30 cm (6 to 12 in) above the leaves and run them 12 to 14 hours a day on a timer.
Strips are the right shape for plant shelves. One bar lights a whole row of small pots evenly, where a single bulb lights one plant.
I earn a commission when you buy through links to Amazon. It costs you nothing extra.
Rigid bars and flexible tape are not the same
Two different products are sold as “grow light strips.”
| Type | What it is | Good for |
|---|---|---|
| Rigid LED bar | A stiff aluminum or plastic bar, often 30 to 120 cm (1 to 4 ft) long, with a row or two of LEDs | Most plant shelves. Enough light for real growth at close range. |
| Flexible LED tape | A thin, bendy ribbon with a sticky back, sold on a reel | Tight spots and cabinets. Often too weak for anything but low-light plants. |
Flexible tape sold for room decor is not a grow light, even if it is bright to your eyes. If you want tape, buy tape made for plants, and expect to run several rows side by side.
For most people, rigid bars are the better buy.
What to look for
Full-spectrum white light
Choose white light with a color temperature between 4000 K and 6500 K. This looks like daylight. Plants grow well under it, and you can see the true color of the leaves, which makes it easier to spot pests and yellowing.
Pink or purple lights also grow plants. They make a room look odd and make plant problems hard to see.
Real power draw
Sellers often print a large “equivalent” wattage. Ignore it. Look in the specifications for the actual power the bar uses. That number tells you more about how much light comes out.
As a rough guide, bars that draw more power per length give more light. A shelf of low-light plants needs less. A shelf of succulents needs the strongest bars you can fit, set close.
Good listings also give a PPFD figure at a stated distance. PPFD is a measure of how much usable light reaches the plant. A seller who lists it with a distance is giving you real information. See how to choose a grow light for houseplants for what the numbers mean.
Length that fits the shelf
Measure the shelf before you buy. The bar should run most of the length of the shelf. Common sizes are about 30 cm (1 ft), 60 cm (2 ft), 90 cm (3 ft), and 120 cm (4 ft).
A shelf deeper than about 30 cm (12 in) needs two bars side by side for even light front to back.
Bars that link together
Linkable bars connect to each other with short cables, so several shelves run from one plug. Check how many bars the maker allows on one chain. Do not go over that number.
A way to mount it
Look for what is in the box:
- Clips and screws for a wood shelf
- Zip ties for wire shelving
- Magnets for metal shelves
- Sticky pads (the weakest choice, and they can let go in warm, humid air)
A timer
Plants need a steady day length. A built-in timer is handy. A separate plug-in outlet timer from Amazon works with any light and is easier to set.
Safety marks and heat
Lights run for many hours near water. Choose bars with a recognized safety certification mark for your country, such as UL, ETL, or CSA. Keep plugs and power supplies where water cannot drip on them.
LED bars run warm, not hot. An aluminum body helps shed heat and makes the LEDs last longer.
Search by type
- For standard shelves: linkable full-spectrum LED grow light bars from Amazon
- For under cabinets and small shelves: under-shelf full-spectrum grow light strips
Read the specifications, not only the photos.
How far above the plants
Light drops off fast with distance. A bar that grows plants well at 20 cm (8 in) does much less at 60 cm (2 ft).
| Plant type | Distance from bar to leaves | Hours per day |
|---|---|---|
| Low-light foliage, such as pothos and ZZ plant | 30 to 45 cm (12 to 18 in) | 10 to 12 |
| Medium-light foliage, such as peperomia and African violet | 20 to 30 cm (8 to 12 in) | 12 to 14 |
| High-light plants, such as echeveria and herbs | 10 to 20 cm (4 to 8 in) | 12 to 14 |
| Seedlings and cuttings | 10 to 15 cm (4 to 6 in) | 14 to 16 |
These are starting points for typical LED bars. Stronger bars can sit farther away. Watch the plants and adjust.
- Too little light: long, pale stems that stretch toward the bar, and small new leaves.
- Too much light: bleached or tan patches on the top leaves, or leaves that curl away from the light.
Do not run lights 24 hours a day. Plants need a dark period.
How to set up a shelf
- Measure the shelf length and depth.
- Pick bars that run most of the length. Use two per shelf if it is deeper than 30 cm (12 in).
- Mount the bars to the underside of the shelf above, toward the front and middle, not against the back wall.
- Link the bars and run the cable down one back corner. Tie it in place.
- Leave a drip loop: let the cable dip below the plug before it rises to the outlet, so water cannot run along it into the socket.
- Plug into the timer. Set 12 to 14 hours, ending before you go to bed.
- Put tall plants at the ends and short plants in the middle, or raise short pots on an upturned saucer so all the leaves sit at about the same distance.
- Check the plants after two weeks and move the bar or the pots as needed.
A shelf full of pots, wet soil, and lights is heavy. See how to choose a plant shelf that holds the weight.
Why strips suit a cold-climate winter
In a northern winter, daylight can be as short as eight hours, and many of those are gray. Windows are cold, and the sill may be the worst place for a tropical plant in January.
A lit shelf on an inside wall solves both problems. Plants get a full day of light away from cold glass and drafts. Plants under lights also keep growing, so they need more water than plants on a dim sill, and a little fertilizer. How to use LED grow lights for indoor plants covers day-to-day use.
What to skip
- Decor tape sold as grow tape, with no power figure or light data
- “Equivalent” wattage with no real wattage listed
- Purple-only light in a room you live in
- No safety certification mark
- Sticky pads as the only mount
Quick buying checklist
- Rigid LED bar, not decor tape
- Full-spectrum white, 4000 K to 6500 K
- Real power draw listed
- Length matches the shelf
- Linkable, with the chain limit stated
- Clips, screws, or zip ties included
- Timer built in or added
- Safety certification mark
One bar on one shelf is a good first test. If the plants on it grow tighter and greener within a month or two, add more. If you have no shelf and one large plant, a pendant or clip lamp fits better than a strip. See how to get more light for indoor plants.