The best pruning snips for houseplants are small bypass snips with thin, pointed stainless steel blades and a spring that opens them after each cut. They reach into tight spaces, cut soft stems cleanly, and wipe clean in seconds. For woody stems thicker than a pencil, add a pair of bypass hand pruners.
Kitchen scissors work in a pinch. A sharp tool made for plants makes a cleaner cut, and a clean cut heals faster.
I earn a commission when you buy through links to Amazon. It costs you nothing extra.
Why the cut matters
A sharp blade slices through a stem. A dull blade crushes it. Crushed tissue dies back, turns brown, and gives rot and disease a way in.
This matters most on soft stems, such as pothos, tradescantia, and begonia, and on any cutting you plan to root.
The four tools, compared
| Tool | Best for | Cuts stems up to about | Limits |
|---|---|---|---|
| Micro-tip snips | Soft stems, dead leaves, spent flowers, fine work | 6 mm (1/4 in) | Not for woody stems |
| Floral or bonsai scissors | Soft stems, leaf trimming, shaping | 6 mm (1/4 in) | No spring. Tiring for long jobs. |
| Bypass hand pruners | Woody stems on figs, rubber plants, hibiscus | 12 to 20 mm (1/2 to 3/4 in) | Too bulky for tight spots |
| Anvil pruners | Dead, dry wood | Varies | Crush living stems. Skip for houseplants. |
Micro-tip snips
These are the everyday tool. They look like slim scissors with short, narrow blades and a spring between the handles. The fine tips slide between crowded stems and into the base of a plant without nicking the leaves you want to keep.
Use them to deadhead flowers, remove yellow leaves, trim vines, and take cuttings.
Floral or bonsai scissors
These have large finger loops and short, strong blades. They give good control and suit people who find spring handles awkward.
Bypass hand pruners
A bypass pruner has two curved blades that pass each other like scissors. It makes a clean cut on living wood. Keep a small pair for fiddle leaf fig, rubber plant, weeping fig, tropical hibiscus, and other plants with woody stems.
Anvil pruners
An anvil pruner has one blade that closes onto a flat plate. It crushes soft and living stems. It has no place in houseplant care.
What to look for
Blade steel
- Stainless steel resists rust and sap. It needs little care. This is the right choice for most people.
- Carbon steel takes a sharper edge and holds it. It rusts if left wet, so it has to be dried and oiled.
- Non-stick coated blades shed sticky sap. The coating wears off with time and sharpening.
Thin, pointed tips
Narrow tips reach the base of a leaf stem without damage to the growth beside it. Blunt, thick blades cannot.
A spring and a lock
A spring opens the blades after each cut. It saves your hand on a long job. A lock holds the blades shut for storage. Check that the lock works with one hand and does not slip on by itself in the middle of a cut.
Fit
Handles should match your hand. Small hands do better with a smaller tool. Soft grips help. If you are left-handed, look for snips with straight, even handles that work in either hand, or a left-handed pruner.
Blades that come apart
On hand pruners, a center bolt lets you take the blades apart to clean and sharpen them, and replace a worn blade or spring.
Search by type: stainless steel micro-tip pruning snips from Amazon for everyday work, and small bypass hand pruners for woody stems.
Which tool for which plant
| Plant type | Tool |
|---|---|
| Vines: pothos, philodendron, hoya | Micro-tip snips |
| Soft, bushy plants: polka dot plant, nerve plant, herbs | Micro-tip snips or fingertips |
| Ferns and palms: remove whole dead fronds at the base | Micro-tip snips |
| Monstera and large aroids with thick leaf stems | Bypass pruners or a sharp, clean knife |
| Woody trees: figs, money tree, dracaena | Bypass pruners |
| Orchid flower spikes | Micro-tip snips, cleaned before each plant |
| Succulents and cacti | Micro-tip snips or a clean knife. Let the cut dry. |
Clean the blades every time
Dirty blades carry pests and diseases from plant to plant. Cleaning takes seconds.
- Wipe sap and bits of leaf off the blades.
- Wipe both sides of each blade with a cotton pad or cloth wet with 70% isopropyl alcohol.
- Let it dry for a few seconds.
- Do this between plants, and before and after any cut on a plant that is sick or has pests.
Keep a small bottle of 70% isopropyl alcohol with your snips so it is always at hand.
Keep them sharp and rust free
- Dry the blades after each use.
- Remove dried sap with alcohol or warm, soapy water. Dry the tool right away.
- Put a drop of light oil on the pivot and wipe a thin film over carbon steel blades.
- Sharpen once or twice a year, or when the tool starts to tear stems. Use a small sharpening stone on the beveled edge only, at the same angle the maker ground it.
- Store them closed and dry, not in a damp pot or a bucket of wet tools.
A quick test: cut a soft stem or a sheet of paper. A sharp blade cuts clean. A dull one folds or tears it.
How to make the cut
- Find a node. That is the bump on the stem where a leaf joins.
- Cut about 5 mm (1/4 in) above the node. New growth comes from it.
- Cut in one clean squeeze. Do not twist the tool.
- For a dead leaf, cut the leaf stem near the main stem without cutting into it.
- Take no more than a third of the plant at once.
How to prune houseplants has the full method, and how to propagate houseplants from cuttings shows what to do with the pieces. Pruning also fixes stretched winter growth. See why is my houseplant leggy and how to fix it.
Safety with sap
Some houseplants leak sap that irritates skin and eyes. Wear gloves and wash your hands and the blades after you cut:
- Figs and rubber plants (milky latex)
- Poinsettia, crown of thorns, and African milk tree (milky sap)
- Dieffenbachia, philodendron, and monstera (sap with irritating crystals)
Lay down newspaper before you cut a fig. The latex drips and stains floors.
Many of these plants are also toxic to cats and dogs. Pick up every trimmed piece so a pet does not chew it. Store snips closed and out of reach of children.
What to skip
- Anvil pruners. They crush living stems.
- Large garden loppers and hedge shears. Wrong scale.
- The cheapest snips with blades that wobble at the pivot. Loose blades fold a stem and do not cut it.
- Sets with many tools you will not use. One pair of snips and one pair of pruners cover it.
- Household scissors that also cut tape and packaging. They are dull and sticky.
Quick buying checklist
- Bypass design
- Thin, pointed stainless steel blades
- Spring and a lock you can work with one hand
- Handles that fit your hand
- No wobble at the pivot
- A second, larger bypass pruner if you grow woody plants
- A bottle of 70% isopropyl alcohol to go with them